|
(5 based on 2 reviews) | |||
Note: This HID Kit is for the replacement of two headlamp bulbs. The kit contains two HID bulbs and two ballasts
A D2S/D2R HID kit is simply a kit that will plug directly into a headlight unit that already takes either a D2S or D2R bulb. These aftermarket kits are for the situations where your car originally had halogen bulbs in and you are upgrading the whole headlight unit to one constructed for OEM HID using D2R or D2S bulbs. You can then connect plug the original halogen bulb power supply wires directly to this HID kit to give you a functional HID Xenon headlight without the need for extensive re-wiring of your car electrics.
This will differ somewhat from car to car, however the 35W Stealth HID Kits will give approximately 300% more light on the road compare to a halogen bulb. This is a massive improvement which will transform your night time driving experience. Hazards, road markings, corners, signs and anything else you need to see will be far more visible, increasing road safety significantly.
If your car came out of the factory with OEM HID Xenon, you won't be able to use this kit without some extensive updates to your existing wiring. This is because your existing wiring will be configured to plug into the OEM HID system that has a significantly more complicated set up due to additional features such as self levelling and headlight washers. If you are capable of re-wiring the vehicle to remove those elements and re-code the ECU to stop it looking for those additional features, this kit can be used. However we do not have any details on how to do this and it in most cases much more work than it's worth.
If you're in this situation where you need a new HID Xenon kit for an OEM factory fit set up, you need to purchase the correct OEM ballasts here. They can then be connected to the original wiring without the need for such extensive re-wiring. You can also buy D2S bulbs here and D2R bulbs here as required.
This is a fair question as there are a large number of HID kits available on the market, especially on the "cheap and cheerful" marketplaces that we all know and love! However, despite first appearances, all HID kits are not built the same!
Here at HIDS4U, we are not just a reseller. We do extensive testing and product development on our HID conversion kits. We ensure only the best quality components are used to give you the performance you are expecting.
With our products you can expect the following:
We offer 4 different colour temperatures depending on your preference. The choice is largely between maximum light output and colour. Let's run through the options:
In a word, no! These kits are provided on a DIY plug and play basis. The D2S and D2R HID bulbs are a direct replacement for the existing ones and you then simply connect the bulb cables to the ballast using the plug and play connectors. Often our Stealth ballasts will fit inside the headlight unit, but in the case where you have little room within the unit, you can mount the ballasts in the engine bay. This will require you to drill a small hole in your dust cover to allow the bulb and ballast cables to connect.
Our instructions are written by ourselves in an easy to follow, step by step process and is in proper English. We are also on hand to assist with any queries or issues you have to ensure you are up and running with these as soon as possible.
The HIDS4U Stealth kits come in two different power ratings, these 35W kits and also a 55W version. The difference is simply the brightness. The D2S and D2R 55W Stealth HID kits will give up to 400% more light compared to a halogen, whereas these 35W kits are rated at 300% brighter. Most vehicles will be fine with either so it's entirely up to you which one you go for.
You can have the best bulbs in the World in your headlights, but if your lenses are yellow and hazy with sun oxidisation your vision is going to be seriously affected. Luckily there's a very quick, simple and cheap solution with the Twenty20 Crystalite headlight restoration kit.
It's a simple 2 stage wipe system that will clean and remove the yellow haze in minutes. No drill pads, tapes, polishes or complicated processes. Your headlights will be returned to crystal clarity and protected with a new UV protection layer to ensure it lasts.
Daniel Kim
Bulb Size What size bulb your vehicle takes. | D2R/D2S | |
Wattage The higher the wattage, the brighter the bulbs will be. | 35W | |
Approx Light Increase The approximate light performance increase over standard halogen bulbs. | +300% Brighter | |
Bulb Life How long (approx.) the bulb will last before needing replacing. | 2500 Hours | |
CAN-Bus (Error-Free) Compatible Ensures ‘Error-Free’ compatibility with virtually all vehicles, without the ‘blown-bulb’ dashboard warnings that can show with m | Yes | |
Input Voltage The input voltage of the ballast. | 12V DC | |
Voltage Output The output voltage of the ballast. | 85V AC | |
Ballast Dimensions Physical size of the ballast unit. | 90mm x 75mm x 16mm | |
Ballast Type Whether the ballast is digital or analogue. | Digital |
Free UK shipping available for any order £20 or over. For orders under £20, UK Super Saver is only £2.95!
If you need your order faster, we have express shipping for only £4.99.
If you need your order faster, we have express shipping for only £6.25.
Unit 4, Hollybrook Road |
Southampton |
Hampshire |
SO16 6RB |
United Kingdom |
HIDS4U.co.uk,
Unit 4 Hollybrook Road,
Southampton,
Hampshire
SO16 6RB
England
Terms & Conditions | Privacy Policy | XML Sitemap | © HIDS4U.co.uk. All Rights Reserved.